Sign In
Create Account
Find content
Not Telling
I am listing this on behalf of my friend Steven in NSW. Irregardless of location this is a killer motor at a GREAT price.
For sale is the engine out of my R33, it was running 390rwkw with the below list of parts, add in a set of cams and you have yourself a 400kw capable package. I have receipts for most of the parts some have been lost over the years but i can supply a PDF of the ones i have upon request.
The engine is currently at an engine shop to be pulled down and checked out, if all is good it will have as minimum all bearings replaced when it is put back together, meaning you get effectively a brand new engine
The engine will be supplied complete with everything bolted on from throttle body to dump pipe, and sensors.
Parts list:
RB30 series 2 Block
R33 RB25DET head
Forged pistons (Arias 9.3:1 CR, oversize 86.5mm bore)
MLS 1.3mm Head gasket
Forged rods (Eagle with ARP bolts)
Grub screwed stock RB30 crank
Pro Engines extended oil pump drive
RB26 standard water pump
RB26 N1 Oil pump
Solid line External oil feed for VCT using T piece at the oil pressure sensor.
ARP main studs
ARP head studs
ETM steam pipe high mount exhaust manifold (ceramic coated)
Synchronic 50mm external waste gate (plumbed back into dump pipe)
ETM 4" Dump pipe reducing to 3.5” at exit
Garrett GT3582R 0.82 AR rear housing (rear housing has been ceramic coated)
Greddy Intake Plenum (genuine not a cheap ebay copy)
Q45 90mm Throttle body
Balanced pistons, rods, crank (to within 0.1 gram)
Stock cams with VCT retained
Aftermarket valve springs
Stock fuel rail
Nismo 740cc injectors
Stock fuel pressure regulator
exhaust side of head oil drain to sump
ASR 6.5L extended/baffled sump with additional -10 fittings (everything that returns oil to the sump has its own fitting, no T pieces or Y joins)
Yellow Jacket coil packs
4" intake pipe with pod filter
Ignitor, CAS other factory sensors/electronics
NISMO R33 engine mounts
Will not come with power steering pump, aircon compressor or harmonic balancer
Can be supplied with the alternator and spare stock coil packs if you wish
Asking $12,000.
Contact by phone/sms 0419302418
Hank Scorpio
Antilag Racewars
24 December 2012 - 09:36 AM
Yeah I know it's Antilag and everything but fark me! I'm all signed up and have my accomodation booked.
http://www.racewars.com.au/
Who's up for 1,000m drags!?!
http://www.racewars.com.au/
Who's up for 1,000m drags!?!
The Worlds Best Private Race Track - Kulnura NSW
10 December 2012 - 03:33 PM
https://maps.google.... Australia&z=15
http://www.news.com....0-1226533204151
When former Coca Cola Australia boss Dean Wills lost his license in 1996 he did what any self respecting millionaire would do, and built his own motherfuckin' race track! It has been described as one of the best tracks in the world and was built so that he could race his McLaren F1 and other cars without any hassles.
SO MUCH WANT!!!
Project Hairdresser: Hank's FC3C RX7 Convertible
11 November 2012 - 11:01 AM
So on Saturday morning this beast got delivered to work where it now happily sits in the corner not doing a whole lot of anything...
What will I do with it? Who the fuck knows? I might put the 20B in it, I might find a 13B and a box and chuck that in, I may end up selling the car as is.
Either way at the moment I have two Mazdas, one is rego'd and one has an engine in it. I think I've lost the plot...
Stay tuned for developments!
What will I do with it? Who the fuck knows? I might put the 20B in it, I might find a 13B and a box and chuck that in, I may end up selling the car as is.
Either way at the moment I have two Mazdas, one is rego'd and one has an engine in it. I think I've lost the plot...
Stay tuned for developments!
Community Forum Software by IP.Board
Licensed to: West Coast Cruisers, 2012
