here is a couple of pics of my r31 project car
DSC00569.JPG 2.24MB
20 downloads
DSC00573.JPG 2.06MB
23 downloads
DSC00570.JPG 2.19MB
18 downloads
DSC00578.JPG 2.25MB
9 downloads
DSC00572.JPG 2.31MB
6 downloads
my r31 project
Started by ray, Jan 31 2011 07:59 AM
#1
Posted 31 January 2011 - 07:59 AM
oversteer = backend hits the wall
understeer = frontend hits the wall
torque = how far you push the wall
hp = how fast you hit the wall
understeer = frontend hits the wall
torque = how far you push the wall
hp = how fast you hit the wall
#2
Posted 31 January 2011 - 05:30 PM
She'll get there dude, just keep on it and don't lose your motivation.
It'll be worth it in the end.
It'll be worth it in the end.
#3
Posted 31 January 2011 - 10:32 PM
like 2LV8ETR said, keep at it, its definately worth it once everything starts going back together.
98 STi Twinscrollin
EJ20 inside
EJ20 inside
#4
Posted 01 February 2011 - 09:14 PM
LOL I had to rub my eyes there for a sec seeing that filter on top of the rocker cover.
Go Hard Or Fuck Off Home. Kick Ass, Take No Prisoners!!!
All donations to West Coast Cruisers is very much appreciated
#5
Posted 14 February 2011 - 10:51 PM
yeah i will keep at it
havin some probs though,done motor and auto swap but stupid tranny wiring is totally differant
scored another car withlsd and a 5 speed and motor, swapped that and still wont go.
will be doing a complete wire harness swap through the week,that should fix it
also have rb25 turbo head to go on rb30 bottom so will be slowly getting parts for that
over next couple months
it will do nice drifts once finished,barbs here i come
i will have to drift my 33 until then DSC00560.JPG 2.29MB 2 downloads
havin some probs though,done motor and auto swap but stupid tranny wiring is totally differant
scored another car withlsd and a 5 speed and motor, swapped that and still wont go.
will be doing a complete wire harness swap through the week,that should fix it
also have rb25 turbo head to go on rb30 bottom so will be slowly getting parts for that
over next couple months
it will do nice drifts once finished,barbs here i come
i will have to drift my 33 until then DSC00560.JPG 2.29MB 2 downloads
oversteer = backend hits the wall
understeer = frontend hits the wall
torque = how far you push the wall
hp = how fast you hit the wall
understeer = frontend hits the wall
torque = how far you push the wall
hp = how fast you hit the wall
#6
Posted 14 February 2011 - 11:13 PM
#7
Posted 14 February 2011 - 11:43 PM
LOL I had to rub my eyes there for a sec seeing that filter on top of the rocker cover.
That's one hell of a breather!
Those CR KAIs would look good on my wagon! Probably worth a lot more then my wagon...
RM_Photography
RM_Photography on Facebook
RM_Photography!
Resident supplier of Garret, Sonic Performance, Turbosmart and all Bosch products.
MTQ Engine Systems
Practicality is an unfamiliar concept...
PUNCTUATION SAVES LIVES!!
-Lets eat Grandma
-Let's eat, Grandma!
RM_Photography on Facebook
RM_Photography!
Resident supplier of Garret, Sonic Performance, Turbosmart and all Bosch products.
MTQ Engine Systems
Practicality is an unfamiliar concept...
PUNCTUATION SAVES LIVES!!
-Lets eat Grandma
-Let's eat, Grandma!
#8
Posted 15 February 2011 - 05:47 PM
yeah be something like that ,unfortunaly the guy i got the car from cut up the wiring
harness.
started wiring swap over today,what a nightmare the whole dash has to come out
not good in a shed thats 10 degee hotter than out side
got the harness out of the donor car ,now just to fit it to the project
pick up my turbo r33 gearbox clutch and tail shaft for the 25/30 conversion tonight
and r33 harness on sunday so i will have 90% of the parts for that too.
lsd diff will be going in in the next few weeks also
give it a month and it will be drivable
harness.
started wiring swap over today,what a nightmare the whole dash has to come out
not good in a shed thats 10 degee hotter than out side
got the harness out of the donor car ,now just to fit it to the project
pick up my turbo r33 gearbox clutch and tail shaft for the 25/30 conversion tonight
and r33 harness on sunday so i will have 90% of the parts for that too.
lsd diff will be going in in the next few weeks also
give it a month and it will be drivable
oversteer = backend hits the wall
understeer = frontend hits the wall
torque = how far you push the wall
hp = how fast you hit the wall
understeer = frontend hits the wall
torque = how far you push the wall
hp = how fast you hit the wall