I did this in my R32 Skyline but you can adapt the job to suit your vehicle.
I decided to use my ashtray for locating the controller box because I'm not a disgusting filthy smelly smoker and the ashtray is a waste of space.
The first thing I did was measured the size of the controller box and then cut the hole for it using a drill, a die grinder, and files.
Next I glued the controller box into the ashtray using a hot melt glue gun.
I wired the whole lot up using a harness for easy removal when needed.
I located the shift lamp into the fascia so it would be in a permanent location and in my face.
If you want to locate the lamp here, you'll need to double check, then triple check your measurements to make sure that the lamp and the fascia line up precisely. The lamp was too big to locate behind the fascia alone so I had to drill a hole into the perspex cover for the lamp to protude from.
Here it is in operation.
Custom Shift Lamp Installation
Started by 2LV8ETR, Jul 24 2010 07:03 PM
#1
Posted 24 July 2010 - 07:03 PM
#2
Posted 24 July 2010 - 07:12 PM
#3
Posted 24 July 2010 - 08:21 PM
Cool.
Some guys put a light where the M is so it lights up... Awesome but serious case of cbf...
Some guys put a light where the M is so it lights up... Awesome but serious case of cbf...
#4
Posted 24 July 2010 - 08:31 PM
That doesnt sound like you, James??
RM_Photography
RM_Photography on Facebook
RM_Photography!
Resident supplier of Garret, Sonic Performance, Turbosmart and all Bosch products.
MTQ Engine Systems
Practicality is an unfamiliar concept...
PUNCTUATION SAVES LIVES!!
-Lets eat Grandma
-Let's eat, Grandma!
RM_Photography on Facebook
RM_Photography!
Resident supplier of Garret, Sonic Performance, Turbosmart and all Bosch products.
MTQ Engine Systems
Practicality is an unfamiliar concept...
PUNCTUATION SAVES LIVES!!
-Lets eat Grandma
-Let's eat, Grandma!
#5
Posted 27 July 2010 - 12:01 AM
#6
Posted 27 July 2010 - 01:02 AM
Can't remember exactly but you can get them at any auto store in the performance section.
#7
Posted 27 July 2010 - 08:09 PM
shift light, more like shit light.
free rev for the mother fu*in win -then when ur motor blows build rb30det
should make a diy section or somethin ay
free rev for the mother fu*in win -then when ur motor blows build rb30det
should make a diy section or somethin ay
#8
Posted 27 July 2010 - 10:09 PM
#9
Posted 27 July 2010 - 11:00 PM
Try AutoOne. If they don't have it they can get one in for you.
Ring bro.
If all else fails, try a performance shop and they'll have one. It'll be more expensive and be prepared to grab your ankles.
Ring bro.
If all else fails, try a performance shop and they'll have one. It'll be more expensive and be prepared to grab your ankles.
#10
Posted 30 July 2010 - 10:36 AM
#11
Posted 30 July 2010 - 01:57 PM
my gemini came with a gey monster tacho 5" which i ripped off straight away, the switch on that one was built into the tacho
probably got it in my shed, if u want it
probably got it in my shed, if u want it